Requirements

For best timing precision when used with SuperLab, the Lumina controller needs to be in Standard mode. This requires that you install the USB driver on your Mac or Windows computer.

Setting Up Your Experiment in SuperLab

• Click on the Experiment menu and choose Participant Input. A dialog (screen) appears showing you the list of available input devices.
• Select the input “Lumina MRI Pads”.
• Click on the Setup tab.
• Click on the Auto Detect button. If your response pad is connected to the computer and the USB driver is properly installed, SuperLab will find it and tell you so.

If SuperLab fails to find the response pad in the last step above, the most likely reason would be that the USB driver need to be installed or re-installed.

Back to Lumina Support main page  ►
Last Revision: Feb 26, 2016