Welcome to the Lumina fMRI response pads customer support area.  Here are the documents currently available.

Using an older model?

This page shows the support documents available for the current USB-based RB-x30 models introduced in November 2003 (see picture on the right). Click here for support on earlier models.

Installing and Using an RB Series Pad

• Overview of Installing and Using an RB Series Response Pad

• Installing the USB Drivers for Mac OS X

• Installing the USB Drivers for Mac OS 8 or 9

• Installing the USB Drivers for Windows

Interfacing with Application Software

The RB Series response pads are compatible with the following application programs:

Dear Developer

It is our goal to make the RB Series response pads compatible with as many software products as possible. Click here for more information.

• E-Prime

• Inquisit

• Presentation 

• SuperLab 4.0

• SuperLab for Macintosh 1.7x 

• SuperLab for Windows 2.0x

If you are not using any of the applications listed above, click here for additional information.

Other Support Documents

• The Response Pad DIP Switches

• Interfacing with the Accessory Connector

• Determining or Changing the USB Driver's COM Port Setting (Windows)

• Comparing the Different RB Series Response Pad Models

• Firmware Revision History

• The RB Series Response Pads Protocol