Installing and Using an RB Series Response Pad
Last
Revision: October 3, 2011
The information in this
document applies to:
Installation
Using your RB-x20 response
pad does not require the installation of a device driver. However, if
your computer does not have a built-in serial port, you will need a
USB-serial port adapter, and that adapter will need to have its driver
installed. Cedrus recommends
this Saelig product.
Only the serial cable needs to be connected
to your computer. When looking at the back of the response pad, the serial
port connector is the one to the right.
The RB Series pads do not
require a power supply.
Using the Response Pad With Your
Software
All currently shipping Cedrus
response pads support a wide range of application programs. Click on one of
the following links for additional installation and use instructions:
See the RB Series
Support home page for additional information.
|
