XID Accessory Connector Command
Set Debounce Time (a6)

What it Does

Sets the debouncing period for those I/O lines that are designated as input. This command affects the XID device's behavior only when the Accessory Connector mode is set to General Purpose and some lines have been set as input by the Set I/O Direction command.

Factory default is zero milliseconds.

Using This Command

Send bytes a6 followed by a single byte indicating the debouncing period in milliseconds.

Corresponding Inquiry Command

Send bytes _a6. The XID device returns _a6 followed by a single byte indicating the debouncing period.