Using an RB-530, RB-730, RB-830, or RB-834 response pad with SuperLab requires that you install the USB driver on your Mac or Windows computer.
•
Click on the Experiment menu and chose Participant Input. A dialog (screen) appears showing you the list of available input devices.
•
Select the input “RB-x30 Series Response Pad”.
•
Click on the Setup tab.
•
Click on the Auto Detect button. If your response pad is connected to the computer and the USB driver is properly installed, SuperLab will find it and tell you so.
If SuperLab fails to find the response pad in the last step above, the most likely reason would be that the USB driver need to be installed or re-installed.
Last Revision: Feb 9, 2010
PRODUCTS
SUPPORT
STAY IN TOUCH
© Copyright 2024 Cedrus Corporation, P.O. Box 6309, San Pedro, CA 90734 - USA
Phone: +1-310-548-9595. Send us an email. See privacy policy.
qwerasdf