Enabling or setting StimTracker options are described elsewhere in this support section. But if you are using an m-pod, there are additional options available to you:

• If the default output signals do not suit your experiment, you can choose which signal(s) is delivered on what output pin; see Configuring Pin Assignments.
• If your data recorder cannot handle event markers that have a short duration, you can instruct m-pod to always deliver TTL output with a minimum pulse duration.
• Instead of always “reflecting” the input, m-pod can deliver a pulse on onset and another pulse on offset; see Changing Output Mode.

Back to StimTracker Support main page
Last revision: Apr 29, 2020